DAS and telecommunications components

Antennas, couplers and mounting accessories for mobile repeater DAS and telecommunications installations. We help select components to suit your frequency bands, RF design, connector requirements and installation conditions.

Ultrathin domes
Panel antennas
Parabolic grids
Spring clips
Couplers
Full catalogue

Proeye ultrathin omni dome antenna with blue cable tail

Proeye Enterprise UWB parabolic grid antenna

Proeye ultrathin dome antennas

Low-profile SISO omnidirectional ceiling antennas for indoor mobile coverage. The slim white ABS radome provides a discreet fitting for contemporary interiors.

Ultrathin dome antenna specifications
Frequency bands	698–806 / 806–960 / 1710–3800 MHz
Gain by frequency group	2 / 2 / 4 dBi
Polarisation	H, as listed in the supplied specification
VSWR by frequency group	≤1.8 / ≤1.5 / ≤1.5
Impedance / maximum input power	50 Ω / 50 W
Dimensions / net weight	160 mm diameter × 17.5 mm / 0.2 kg
Standard cable / connector	1000 mm cable with N-male in the mechanical specification; other connector options are listed and should be confirmed when ordering
Radome / colour	ABS / white
Operating temperature	−40 to +55 °C

SISO Ultrathin specification, 25 September 2026 PDF, 85 KB

Request a quote

Proeye 5G SISO panel antenna

A compact wall-mounted panel antenna for directional indoor coverage. The HT-SO-0738-BG uses vertical polarisation and an N-female connector on a cable tail.

5G SISO panel antenna specifications
Model	HT-SO-0738-BG
Frequency bands	698–960 / 1710–2690 / 3300–3800 MHz
Gain by frequency group	6 ±1 / 7 ±1 / 7 ±1 dBi
Horizontal beamwidth	90 ±20° / 80 ±10° / 70 ±10°
Vertical beamwidth	60 ±10° / 55 ±8° / 50 ±5°
Front-to-back ratio	≥15 dB
Impedance / input power	50 Ω / 50 W maximum
Dimensions / weight	165 × 155 × 50 mm / 0.33 kg
Mounting / enclosure	Wall mounting / IP65
Operating temperature	−40 to +55 °C

Frequency groups and gain values follow the electrical specification table in the linked PDF. Select the antenna and mounting position to suit the coverage design.

SISO panel antenna specification PDF, 157 KB

Request a quote

Proeye Enterprise UWB parabolic grid antenna

A high-directivity donor antenna for receiving signals from the selected serving site, combining an ultra-wideband feed, parabolic grid reflector and articulating mount.

Enterprise UWB parabolic grid antenna specifications
Frequency groups	600–960 / 1700–2700 / 3000–6500 MHz
Typical gain, specification table	15 dBi low / 20 dBi mid / 23 dBi high
3 dB beamwidth	20° low / 12° mid / 7° high, with the feeder set to vertical polarisation
Polarisation	Vertical / horizontal / 45°; adjustment through the mounting assembly
Impedance	50 Ω
VSWR	1.6:1 to 1.4:1 typical
Connector	N-female; 4.3-10 option by special order
Reflector	Aluminium, electrostatic powder-coated finish
Bracket and articulating rings	4 mm stainless steel
Operating temperature	−40 to +60 °C

Proeye can assist with donor-site selection, antenna alignment and mounting requirements. Confirm the mast arrangement, structural loading and installed dimensions for the site.

The February 2025 specification is the current reference. Some gain annotations and dimensions differ elsewhere in the supplied documents; this table follows its RF specification table and omits conflicting dimensions. The November 2024 guide is provided for assembly reference.

Request a quote

Proeye dome spring clips

Ceiling-fixing springs for compatible dome antennas.

Stainless steel spring mount

SKU: Ant- Steel Spring Mount

316 heat-formed stainless steel spring. The drawing shows a 240 mm span, 50 mm width, 24 mm opening and 0.9 mm wall thickness.

Polycarbonate spring mount

SKU: Ant- Poly Spring Mount

The drawing shows a 265 mm span, 50 mm width, 24 mm opening and 3.0 mm wall thickness.

For suitable dome antennas covering the opening, the supplied sheet describes installation holes up to 150 mm diameter. Confirm antenna compatibility and ceiling construction for the installation.

Request a quote

Proeye couplers, 3 dB to 12 dB

RF couplers for distributing signal through a DAS antenna network. Choose the coupling value to suit the branch loss, cable runs and antenna levels in your design.

Coupling range: 3 dB to 12 dB
Confirm frequency range, connector type, power handling and PIM requirements when enquiring
Final coupling values and quantities are selected for the RF design

Enquire about couplers See couplers in the catalogue

Product catalogue

Browse the full list of RF components, connectors, antenna hardware and installation accessories. Names and available SKUs come from our inventory reference; pricing and availability are confirmed by quotation.

Showing all 62 items

DAS and telecommunications components

Proeye ultrathin dome antennas

Proeye 5G SISO panel antenna

Proeye Enterprise UWB parabolic grid antenna

Proeye dome spring clips

Stainless steel spring mount

Polycarbonate spring mount

Proeye couplers, 3 dB to 12 dB

Product catalogue

Antennas 2 items

Directional Antenna

Radio Whip Antennas

Mounting Brackets, Clamps and Spring Clips 15 items

3 Access Articulating Bracket

50mm galvanised steel collar

Antenna pole standoff bracket

Articulating ring (black)

Articulating ring (silver)

Cad Plated - M8 V Block

Feeder Brackets

Flush Wall Mount Bracket

Fully Assembled Bracket

Light Angle Roof Mount Galvanised (not all have u bolt)

Proeye Dome S Fixing Bracket

S5 Roof Clamp - Warehouse Metal Roof Profile

Spring Clips

U-Bolt

Universal solar clamps

RF Couplers 11 items

5dB Directional Coupler Connector 4.3-10-Female FR 698-3800MHz

5dB Directional Coupler N-Female Connector FR: 698-3800Mhz

6dB Directional Coupler 4.3-10-Female Connector

6dB Directional Coupler Fr:700-2700MHX

6db Directional Coupler N-FEMALE CONNECTOR

8dB Directional Coupler Female 4.3-10 Connector FR:698-3800MHz

8dB Directional Coupler N Female Connector Fr:698-3800MHz

10dB Directional Coupler Female 4.3-10 Connector FR:698-3800MHz

10dB Directional Coupler N-Female connector FR:698-3800MHz

12dB Directional Coupler FR:698-3800MHz

Hybrid Coupler 2:2 FR:698-3700MHz

Splitters, Dividers and Combiners 8 items

1:2 Wilkinson Divider SMAF Connector:SMA-Female FR:500-6000MHz

1:3 Wilkinson Divider Connector N Female FR:698-3800MHz

1:4 Wilkinson Divider Connector: N Female FR:698-3800MHz

1:4 Wilkinson Divider SMAF Connector: SMA-Female FR:500-6000MHz

2 Way Wilkinson Power Divider 24dB Connector type N Female FR:698-3800MHz

4 in 4 out Hybrid Combiner Connector Type N Female 4.3-10 698-3800MHz

4 In 4 Out Hybrid Combiner Connector Type N Female 698-3800MHz

6 Way Power Splitter

Attenuators, Filters, Protection and Loads 8 items

5W Dummy Load FR: DC-3.8GHz

10dB 2W Attenuator FR:DC-4GHz Connector:N-M/N-F

15dB 2W Attenuator FR:DC-4GHz

20dB 2W Attenuator FR:DC-4GHz Connector: N-M/N-F

30dB 2W Attenuator FR: DC-4GHz Connector N-M/N-F

Band-Stop Filter (10W max)

Ferrite RF Choke

LP-GTV-N SERIES COAXIAL LIGHTNING PROTECTOR

Connectors and Adaptors 13 items

4.3-10 Female Connector For 7/8

78EZNF N Female Connector

Female 4.3-10 Straight Connector 1/2 Inch Cable

LMR 400 Clamp Style N-Female Connector

Male 78EZHM 4.3-10 Connector

N Female Positive Stop Connector 1/2 Inch Cable

N Female to N female adapter

N Male Positive Stop Connector 1/2 Inch Cable

N MALE TO 4.3-10 MALE

NM-NM-AD

RF COAX ADAPTER N-TYPE

Straight Male 4.3-10 Heliax Connector

U-Shaped Adapter N-M/N-F

Installation Accessories 4 items

A3 Document Folder

Dektite (Deks)

Dektite (Small)

Rubber Grommet

Items Requiring Identification 1 items

Item identification required — 43

Component enquiries